| Using two monobloc amplifiers, rather than a two-channel
stereo power amplifier can significantly improve the performance
of any hi-fi system.
Although the 8000M offers greater power output than an 8000P,
it is gain matched, so should you upgrade your system in the
future, you can happily use the two in combination.
The 8000M provides a genuine 125W power into an 8Ohm loudspeaker
load, and features twin output terminals for bi-wiring.
It has parallel phono connectors making it easy to connect
several pairs of 8000Ms to any pre-amplifier. This allows
you to daisy-chain units to further improve headroom in bi-amped
and even tri-amped systems.
Simple styling belies the power and speed of response available
from this compact amplifier.
|
| |
| Specification |
| Rated output power |
125 W per channel into rated load impedance (8?),
200 W into 4? |
| Typical output power |
145 W per channel into rated load impedance (8?),
240 W into 4? |
| Input for full rated power |
1.13 V rms |
| Input impedance |
47 k? nominal |
| Gain |
29.0 dB at 1 kHz |
| Signal to noise |
Greater than 96 dB (relative to 0 dBW) |
| Frequency response (-3 dB) |
0.1 Hz - 75 kHz |
| Frequency response (±0.3dB) |
20 Hz - 20 kHz |
| Total harmonic distortion + noise |
Less than 0.05% |
| Dimensions (WxHxD - mm) |
445 x 74 x 337 |
|
